| BD-N | Tool Ordering Number |
Dimensions | Grade | Description | ||||
| D | L | R | XRN | TLN | HSN | |||
 |
BD-0375-N | 0.375 | 0.357 | 1/32,1/16 | • | • | • | Precision ground with 7º back taper. Used for milling of cores, cavities, fillets with straight or very steep walls of harder materials. |
| BD-0500-N | 0.500 | 0.380 | 1/32,1/16 | • | • | • | ||
| BD-0625-N | 0.625 | 0.457 | 1/32,1/16 | • | • | • | ||
| BD-0750-N | 0.750 | 0.540 | 1/32,1/16,1/8 | • | • | • | ||
| BD-1000-N | 1.000 | 0.740 | 1/32,1/16,1/8 | • | • | • | ||
| BD-1250-N | 1.250 | 0.919 | 1/32,1/16,1/8 | • | • | • | ||
| BD-R | Number | D | L | R | XRN | TLN | HSN | Description |
 |
BD-0375-R | 0.375 | 0.340 | 1/32 | • | • | • | Precision ground with positive ground chip-breaker and 7º back taper. Used for milling of cores, cavities, fillets with straight or very steep walls of softer materials. |
| BD-0500-R | 0.500 | 0.380 | 1/32,1/16,1/8 | • | • | • | ||
| BD-0625-R | 0.625 | 0.457 | 1/32,1/16 | • | • | • | ||
| BD-0750-R | 0.750 | 0.540 | 1/32,1/16,1/8 | • | • | • | ||
| BD-1000-R | 1.000 | 0.740 | 1/32,1/16,1/8 | • | • | • | ||
| BD-1250-R | 1.250 | 0.919 | 1/32,1/16,1/8 | • | • | • |
| BDS | Number | D | L | R | L1 | XRN | TLN | HSN | Description |
 |
BDS-0375-N | 0.375 | 0.340 | 1/32,1/16 | 0.125 | • | • | • | Precision ground with unique crossover design between flat bottom FB and back draft DB inserts. Allows straight walls with a larger step down than BD. Allows higher cutting speeds and feeds. |
| BDS-0500-N | 0.500 | 0.380 | 015,1/32,1/16 | 0.125 | • | • | • | ||
| BDS-0625-N | 0.625 | 0.457 | 1/32,1/16 | 0.125 | • | • | • | ||
| BDS-0750-N | 0.750 | 0.540 | 1/32,1/16,1/8 | 0.125 | • | • | • | ||
| BDS-1000-N | 1.000 | 0.740 | 1/32,1/16,1/8 | 0.125 | • | • | • | ||
| BDS-1250-N | 1.250 | 0.919 | 1/16 | 0.125 | • | • | • |
| FB-R | Number | D | L | R | XRN | TLN | HSN | Description |
 |
FB-0375-R | 0.375 | 0.341 | 1/32 | • | • | • | Precision ground with positive ground chip-breaker. Flat bottom inserts for shoulder milling, fillet finishing and long reach angular wall finishing of softer materials. |
| FB-0500-R | 0.500 | 0.350 | 1/32,1/16,1/8 | • | • | • | ||
| FB-0625-R | 0.625 | 0.421 | 1/32,1/16 | • | • | • | ||
| FB-0750-R | 0.750 | 0.496 | 1/32,1/16,1/8 | • | • | • | ||
| FB-1000-R | 1.000 | 0.679 | 1/32,1/16,1/8 | • | • | • | ||
| FB-1250-R | 1.250 | 0.843 | 1/32,1/16,1/8 | • | • | • |
| TO | Number | D | L | R | XRN | TLN | HSN | Description |
 |
TO-0375 | 0.375 | 0.349 | 0.125 | • | • | • | Precision ground large corner radius & back taper for spiral and pocket milling. Milling of pre-hard and hardened flat surfaces at higher speeds than tools with smaller corner radii. Good choice for HS milling of Aluminum. |
| TO-0500 | 0.500 | 0.377 | 0.125 | • | • | • | ||
| TO-0625 | 0.625 | 0.433 | 0.156 | • | • | • | ||
| TO-0750 | 0.750 | 0.518 | 0.187 | • | • | • | ||
| TO-1000 | 1.000 | 0.716 | 0.250 | • | • | • | ||
| TO-1250 | 1.250 | 0.865 | 0.312 | • | • | • |
| TOBD-NF | Number | D | L | R | XRN | TLN | HSN | Description |
 |
TOBD-0500-NF | 0.500 | 0.377 | 0.125 | Millstar inserts designed for high seed high feed roughing of Aluminum, but also has the versatility to be used for fine finishing as well. |
|||
| TOBD-0625-NF | 0.625 | 0.433 | 0.125 | |||||
| TOBD-0750-NF | 0.750 | 0.518 | 0.125 | |||||
| TOBD-1000-NF | 1.000 | 0.716 | 0.125 |
© EDM Sales & Supplies, Inc.- All Rights Reserved
