| BD-N | Tool Ordering Number |
Dimensions | Grade | Description | ||||
| D | L | R | XRN | TLN | HSN | |||
 |
BD-10-N | 10 | 8,5 | 0,5/0,8/1,0 | • | • | • | Precision ground with 7º back taper. Used for milling of cores, cavities, fillets with straight or very steep walls of harder materials. |
| BD-12-N | 12 | 9,95 | 0,5/1,0/2,0 | • | • | • | ||
| BD-16-N | 16 | 11,55 | 0,5/1,0/1,3/2,0/3,0 | • | • | • | ||
| BD-20-N | 20 | 13,35 | 0,5/1,0/1,6/2,0/3,0 | • | • | • | ||
| BD-25-N | 25 | 19,95 | 1,0/2,0 | • | • | • | ||
| BD-32-N | 32 | 8,5 | 1,0/2,6 | • | • | • | ||
| BD-R | Number | D | L | R | XRN | TLN | HSN | Description |
 |
BD-10-R | 10 | 8,5 | 0,5/0,8/1,0 | • | • | • | Precision ground with positive ground chip-breaker and 7º back taper. Used for milling of cores, cavities, fillets with straight or very steep walls of softer materials. |
| BD-12-R | 12 | 9,95 | 0,5/1,0 | • | • | • | ||
| BD-16-R | 16 | 11,55 | 0,5/1,0/1,3 | • | • | • | ||
| BD-20-R | 20 | 13,35 | 0,5/1,0/1,6 | • | • | • | ||
| BD-25-R | 25 | 19,95 | 1,0/2,0 | • | • | • | ||
| BD-32-R | 32 | 23,35 | 2,6 | • | • | • |
| BDS | Number | D | L | R | L1 | XRN | TLN | HSN | Description |
 |
BDS-10-N | 10 | 8,5 | 0,1/0,8/1,0 | 3 | • | • | • | Precision ground with unique crossover design between flat bottom FB and back draft DB inserts. Allows straight walls with a larger step down than BD. Allows higher cutting speeds and feeds. |
| BDS-12-N | 12 | 9,95 | 0,1/1,0 | 3 | • | • | • | ||
| BDS-16-N | 16 | 11,55 | 0,1/1,0/1,3 | 3 | • | • | • | ||
| BDS-20-N | 20 | 13,35 | 0,1/1,0/1,6 | 3 | • | • | • | ||
| BDS-25-N | 25 | 19,95 | 1,0/2,0 | 3 | • | • | • | ||
| BDS-32-N | 32 | 23,35 | 1,0/2,0 | 3 | • | • | • |
| FB-R | Number | D | L | R | XRN | TLN | HSN | Description |
 |
FB-10-R | 10 | 8,5 | 0,8 | • | • | • | Precision ground with positive ground chip-breaker. Flat bottom inserts for shoulder milling, fillet finishing and long reach angular wall finishing of softer materials. |
| FB-12-R | 12 | 9,15 | 1,0 | • | • | • | ||
| FB-16-R | 16 | 10,65 | 0,5/1,3 | • | • | • | ||
| FB-20-R | 20 | 12,25 | 1,6 | • | • | • | ||
| FB-25-R | 25 | 16,35 | 2,0 | • | • | • | ||
| FB-32-R | 32 | 21,3 | 2,6 | • | • | • |
| TO | Number | D | L | R | XRN | TLN | HSN | Description |
 |
TO-10 | 10 | 8,65 | 3,0 | • | • | • | Precision ground large corner radius & back taper for spiral and pocket milling. Milling of pre-hard and hardened flat surfaces at higher speeds than tools with smaller corner radii. Good choice for HS milling of Aluminum. |
| TO-12 | 12 | 9,20 | 3,0 | • | • | • | ||
| TO-16 | 16 | 11,25 | 4,0 | • | • | • | ||
| TO-20 | 20 | 13,15 | 5,0 | • | • | • | ||
| TO-25 | 25 | 18,25 | 6,0 | • | • | • | ||
| TO-30 | 30 | 22,15 | 7,5 | • | • | • | ||
| TO-32 | 32 | 21,95 | 8,0 | • | • | • |
| TOBD-NF | Number | D | L | R | XRN | TLN | HSN | Description |
 |
TOBD-12-NF | 12 | 9,2 | 3,0 | • | • | • | Millstar inserts designed for high seed high feed roughing of Aluminum, but also has the versatility to be used for fine finishing as well. |
| TOBD-16-NF | 16 | 11,25 | 3,0 | • | • | • | ||
| TOBD-20-NF | 20 | 13,15 | 3,0 | • | • | • | ||
| TOBD-25-NF | 25 | 18,25 | 3,0 | • | • | • |
© EDM Sales & Supplies, Inc.- All Rights Reserved
